An exceptionally well-preserved example of one of the most desirable 300 SL specifications, this early production 1957 Mercedes-Benz Roadster combines factory-fitted Rudge wheels, original DB 180 Silver-Grey Metallic paint, original red leather upholstery, and a documented history spanning just three private owners. Carefully preserved and maintained, recently fully mechanically restored and sorted for regular use, chassis 7500348 offers a remarkable combination of originality, rarity, and usability.

Highlights
- Rare 'Factory Rudge' 300SL Roadster
- Original paint, leather and soft top
- Chassis no. 198042-7500348
- Engine no. 198980-7500338
- Body no. 1980042-7500268
- Matching numbers throughout
- North America special order
- Three private owners from new
- Original DB180 Silbergrau Metallic paint
- Original 1079 Rot leather
- Retains all 5 original Rudge wheels
- Original Karl Baisch luggage
- Original 720 black soft top
- Becker Mexico radio
- 1:3.89 rear axle ratio
- Superbly documented 300SL
- Original books, tools, KO hammer and jack
- Copy of factory data card
- Less than 45,000 original miles
Rare Rudges, Rare Originality
The Factory Rudge Distinction
The availability of Rudge center-lock “knock-off” wheels on the 300 SL Roadster continued a special-order option offered during production of the celebrated Gullwing coupe. Of the 1,400 Gullwings built between 1954 and 1957, approximately 350 are estimated to have been delivered with Rudge wheels. Factory-equipped Rudge wheel Roadsters are considerably rarer: only an estimated 27 of the 1,858 examples produced between 1957 and 1963 are reported to have received this option—less than 1.5 percent of total Roadster production. For perspective, that reported total is smaller than the recognized production of 29 aluminum-bodied Gullwings. The “Factory Rudge” designation consequently distinguishes an exceptionally small group within the 300 SL Roadster series.
Roadster Rudge wheels are also distinct from those fitted to the Gullwing. Measuring 5.5 inches wide rather than 5 inches, the Roadster wheels bear the distinctive “300SLRO” marking on their faces as well as a stamping distinguishing their size. Their appearance has made them highly desirable, prompting the manufacture of reproduction wheels for cars originally delivered with conventional bolt-on wheels and hubcaps. A Roadster documented as having left the factory with Rudges, however, possesses a distinction that a later conversion cannot confer.

Factory Specification and Delivery
According to a copy of its factory data card, chassis 7500348 left Stuttgart-Untertürkheim on October 21, 1957, for delivery to North America through Mercedes-Benz Distributors Western Ltd. of Vancouver. The Roadster was specified in DB 180 Silbergrau Metallic—Silver-Grey Metallic—with 1079 Rot red leather upholstery and a Schwarz black soft top. Its equipment included 5.5 × 15-inch KPZ Rudge center-lock wheels, English-language instruments, sealed-beam headlights, a 3.89:1 rear-axle ratio, a Becker Mexico radio, and a two-piece luggage set.
Today, the car retains the great majority of its factory-applied silver paint, together with its original red leather upholstery and factory-supplied black soft top. Its documented component numbers include engine no. 198.980.7500338, body no. 198.042.7500268, front axle nos. 367 and 366, and rear axle no. 374.

Three Private Owners and a Remarkable History
The accompanying history file records the recollections of the car’s second owner, Merle Solland. According to Solland, the original owner was a successful commercial apple grower in Wenatchee, Washington. The owner’s daughter became fond of the open Mercedes-Benz and drove it around the family’s orchard property. As she approached legal driving age, however, her father decided that a less powerful, more modest automobile would be preferable.
In the spring of 1964, Solland—a world-record-holding hydroplane racer—learned through a racing acquaintance that the Roadster might be available. Having also heard that its owner wanted a more subdued car for his daughter, Solland deliberately drove his Ford to inspect the Mercedes, hoping to arrange a trade. As Solland later recalled, the orchard owner told him: “I can’t tell her no, so give me a little money, leave the Ford here, and take home the Mercedes.”
Solland accepted and drove home in the Rudge-equipped 300 SL. The car remained with his family for the next 54 years. His son, Kurt Solland, recalled that the Roadster had covered approximately 36,000 miles when his father acquired it. Apart from a yellow repaint, which he believed had been applied during the original owner’s stewardship, the car remained substantially original. In 2018, Swedish collector Jan Kanevad purchased the Roadster from the Solland family, becoming its third and most recent private owner. Recognizing its exceptional preservation potential, he entrusted it to 300 SL specialists HK-Engineering of Polling, Germany.

The Recovery of Its Original Paint
The Mercedes-Benz experts at HK-Engineering undertook an unusually demanding preservation project: carefully removing the yellow overcoat of paint to expose the factory-applied Silver-Grey Metallic finish beneath. The later yellow paint’s poor adhesion made this work original paint recovery possible, but the process required extraordinary patience. HK-Engineering reportedly stopped recording its paint removal labor after 1,000 hours devoted to the process of exposing the original exterior surfaces.
Subsequent paint-thickness measurements taken by Scott Grundfor Company upon the car’s arrival in California support the conclusion that the great majority of its original DB 180 finish survives. Identified exceptions include a blended area on the right front fender and several small areas elsewhere, including the hood. These localized refinishing efforts have been executed with considerable care and are difficult to distinguish from the surrounding original paint. The result is not the uniform appearance of a freshly restored automobile, but the character of an extensively preserved factory finish—a quality central to this Roadster’s appeal.

An Exceptionally Preserved Interior and Exterior
Scott Grundfor Company has also confirmed the retention of the factory-installed 1079 red leather upholstery, which presents with the patina of age and careful use. The car’s preservation extends well beyond its paint and leather. Its rubber floor mats, trunk mat, headlights, taillights, and chrome remain in original condition. Particularly noteworthy are the surviving factory-supplied soft top and plastic rear window—items seldom retained on a car of this age.
The original Rudge wheels bear 1957 date stamps and are fitted with period-correct Continental tires. Taken as a whole, chassis 7500348 ranks among the most original 1950s Mercedes-Benz automobiles Scott Grundfor Company has encountered.

Mechanical Restoration by HK-Engineering
HK-Engineering approached the mechanical work with the same sensitivity shown to the car’s cosmetic preservation. Rather than refinish every surface, the firm retained original finishes on many engine and ancillary components. The undercarriage was carefully dry-ice cleaned, revealing its unusually well-preserved, rust-free condition. The mechanical program included overhauls of the engine, gearbox, suspension, rear axle, braking system, and fuel-injection pump.
Invoices also record balancing and blueprinting of the engine, with particular attention to smooth operation. The accompanying records document expenditure exceeding €215,000 for HK-Engineering’s preservation and mechanical work. This comprehensive program allows the car’s exceptional surviving finishes to be appreciated alongside extensively renewed mechanical systems.

Documentation, Luggage, and Accessories
The accompanying history file is unusually comprehensive, retaining original registration documents from the 1960s and the car’s 1963 Washington license plates. Also included are the original red tool roll and jack, original owner’s books, a 300 SL sales brochure, a workshop manual, and a spare-parts book. The trunk contains an original two-piece Karl Baisch luggage set manufactured for inclusion in deliveries from the Mercedes-Benz factory, unlike other brands of luggage which were dealer installed.
A large-format history volume recounts the car’s ownership history and includes period photographs. A second volume documents HK-Engineering’s preservation work through photographs and written accounts.

Component Originality
Further underscoring its exceptional originality, this 300 SL Roadster retains its matching-numbers engine, body, chassis, steering box, rear axle, and front axles, as documented by a copy of its factory build record. The factory data card lists gearbox no. 7500216, while the installed unit is stamped 7500276. Given the visual similarity between the digits “1” and “7,” Scott Grundfor Company believes this discrepancy most likely reflects a clerical error and considers the gearbox highly likely to be the unit installed at the factory, although this has not been conclusively verified.

A Distinctive Opportunity
Factory Rudge specification alone places this Roadster within a remarkably small group. Its largely original paint, original leather, surviving factory soft top, extensive accessories, and three-owner history distinguish it further.
Scott Grundfor Company believes chassis 7500348 may be the only surviving Factory Rudge Roadster to retain both its original leather and the great majority of its factory paint. Although that possibility cannot be stated definitively, the car’s exceptional preservation is compelling in its own right.
With its documented history, rare original specification, and extensive specialist mechanical work, this 300 SL offers something increasingly difficult to find: a Roadster whose appeal rests not on the recreation of its original character, but on the extraordinary extent to which that character has survived.
